Dao phay đầu vuông TEX dùng cho thép không gỉ video
Dao phay đầu vuông TEX dùng cho thép không gỉ video
Dao phay đầu vuông TEX dùng cho thép không gỉ video
Dao phay đầu vuông TEX dùng cho thép không gỉ video
Dao phay đầu vuông TEX dùng cho thép không gỉ video
Dao phay đầu vuông TEX dùng cho thép không gỉ video
Dao phay đầu vuông TEX dùng cho thép không gỉ video

Dao phay đầu vuông TEX dùng cho thép không gỉ

• Cacbua hạt siêu mịn (<0.6 μm, 12% Co)

• Lớp phủ Balzers AP (AlCrN), chịu nhiệt lên đến 1200°C

• Thiết kế lõi kép (52%/70%) giúp tản nhiệt chip hiệu quả

• Góc nghiêng 8°, góc xoắn 45°

• Các rãnh có cao độ không đều (88° / 92°) để triệt tiêu rung động

• Được thiết kế để phay động và gia công thô thép không gỉ.

vật liệu phôi

  • thép không gỉ

loại ứng dụng

  • Phay động
  • Gồ ghề

loại sáo

  • Square

Sơn phủ

  • ALCRN (Lớp phủ AP Balzas)

Mô tả Sản phẩm

The DOHRE TEX square end mill is a solid carbide cutting tool designed for dynamic milling, slotting, side milling, roughing, and semi-finishing of stainless steel, including grades 304 and 316. It features a 45° helix angle, 8° rake angle, 88°/92° unequal flute spacing, dual-core geometry (52%/70%), and Balzers AP AlCrN coating to support chip evacuation, vibration control, and wear resistance.

The TEX Series can also be used for nickel-based alloy machining. Tool selection and cutting parameters should be adjusted according to the specific alloy grade, tool size, operation, and machining conditions.

Để so sánh chi tiết hơn về hình dạng dao cắt được sử dụng trong gia công thép không gỉ, hãy xem hướng dẫn của chúng tôi về các loại dao phay ngón thép không gỉ và cách chọn loại phù hợp.


carbide-square-end-mill-for-stainless-steel.jpg

Bảng dưới đây liệt kê các kích thước tiêu chuẩn của dao phay đầu vuông dòng Dohre TEX dùng để gia công thép không gỉ. Các kích thước và hình dạng tùy chỉnh cũng có sẵn dựa trên yêu cầu ứng dụng của bạn.


Tổng quan về kích thước tiêu chuẩn

MụcPhạm vi / Ghi chú
Phạm vi đường kính1.0 mm - 25.0 mm
Kích thước phổ biếnØ6mm, Ø8mm, Ø10mm, Ø12mm
Sử dụng điển hìnhGia công phay động, gia công thô, gia công bán tinh
Dịch vụ khách hàngĐường kính, chiều dài rãnh, chiều dài tổng thể, kích thước chuôi


Đặc tính sản phẩm

tex square stainless steel end mill feature.jpg


Vật liệu cacbua cao cấp

Dao phay đầu vuông TEX sử dụng cacbua siêu mịn có kích thước hạt dưới 0.6 μm với hàm lượng coban 12% . Vật liệu này mang lại sự kết hợp cân bằng giữa độ cứng, độ dẻo dai và khả năng chống mài mòn, giúp dụng cụ duy trì hiệu suất ổn định trong gia công thép không gỉ.


Lớp phủ Balzers AP

Dao cắt sử dụng lớp phủ Balzers AP dựa trên công nghệ AlCrN , có khả năng chịu nhiệt lên đến 1200°C . Lớp phủ này mang lại độ cứng cao, khả năng chống oxy hóa và chống mài mòn, giúp dao cắt hoạt động đáng tin cậy hơn trong điều kiện cắt thép không gỉ ở nhiệt độ cao.


Cấu trúc lõi kép được tối ưu hóa

Công cụ này sử dụng thiết kế lõi kép, với lõi thứ nhất có độ mở 52% và lõi thứ hai là 70% , kết hợp với góc thoát phôi 8° và góc xoắn ốc 45° . Lõi phía trước nhỏ hơn giúp cải thiện khả năng thoát phôi trong quá trình gia công thô, loại bỏ nhiệt cắt hiệu quả hơn và giảm nguy cơ tích tụ phôi trên cạnh cắt.


Bước răng không đều giúp giảm rung động

Thiết kế góc nghiêng không đều 88° / 92° giúp triệt tiêu rung động khi cắt và cải thiện độ ổn định gia công. Điều này làm cho dụng cụ đặc biệt phù hợp cho gia công thô và phay động , đồng thời giúp đạt được đường cắt mượt mà hơn và kết quả gia công nhất quán hơn.


Để có cái nhìn tổng quan hơn về các ưu tiên lựa chọn dụng cụ, bạn cũng có thể đọc hướng dẫn của chúng tôi về các loại dao phay ngón tốt nhất cho thép không gỉ.

Ứng dụng

Applications of TEX Square End Mills

DOHRE TEX square end mills are designed for stainless steel milling applications where cutting stability, chip evacuation, and edge strength are important. They are suitable for common stainless steel grades such as 201, 304, and 316, as well as other stainless steels under suitable machining conditions.

Các ứng dụng gia công cơ khí điển hình bao gồm:

• Dynamic milling

• Slotting and groove milling

• Side milling and shoulder machining

• Pocket machining

• Roughing of stainless steel components

• Semi-finishing of profiles and flat surfaces

DOHRE TEX square carbide end mill for stainless steel milling applications

Hướng dẫn ứng dụng được đề xuất

The TEX square end mill can be selected for different stainless steel machining operations according to workpiece geometry, material grade, and cutting requirements.

Nhiệm vụ gia côngWhy TEX Square End Mill Fits
Phay độngUnequal flute spacing helps manage vibration, while optimized flute geometry supports chip evacuation during variable-engagement milling.
RãnhSquare cutting geometry supports slot and groove machining. Cutting engagement and chip evacuation must be controlled according to slot depth and tool diameter.
Phay mặtOptimized cutting geometry supports machining of straight sidewalls, shoulders, and defined profiles.
Gia công lỗSuitable for flat-bottom pockets and internal profiles when toolpath transitions and chip evacuation are properly controlled.
Gồ ghềBalzers AP AlCrN coating and dual-core geometry support wear resistance and cutting stability during stainless steel material removal.
Bán hoàn thiệnControlled cutting engagement and consistent tool geometry help maintain surface quality and dimensional stability.

Gia công hợp kim gốc Niken

In addition to stainless steel, DOHRE TEX Series carbide end mills can also be used for nickel-based alloy machining. These materials are often more challenging to cut because of their work-hardening behavior, concentrated cutting heat, and high cutting resistance.

The TEX square end mill features Balzers AP AlCrN coating, a 45° helix angle, an 8° rake angle, 88°/92° unequal flute spacing, and dual-core geometry (52%/70%). These features are designed to support cutting-edge stability, wear resistance, and chip evacuation during demanding milling applications.

For nickel-based alloys such as Inconel, tool selection should be based on the specific alloy grade, material condition, machining operation, and machine rigidity. Cutting speeds, feeds, and engagement should be confirmed for the selected tool specification rather than taken directly from stainless steel test data.

For application-specific recommendations, please liên hệ DOHRE with your workpiece material, required tool size, and machining conditions.

SUS316 Stainless Steel Machining Test

The following test records the machining conditions and measured tool wear of a DOHRE TEX square end mill during SUS316 stainless steel end-face milling. The data provides a practical reference for evaluating tool performance under the recorded conditions.

DOHRE TEX square end mill SUS316 stainless steel machining test and tool wear results

Tham số thử nghiệmGiá trị được ghi
Thông số kỹ thuật công cụ4F-D6×15×D6×50L
Vật liệu phôiThép không gỉ SUS316
Vận hành gia côngGia công mặt cuối
Tốc độ cắt (Vc)94 m / phút
Tốc độ ăn răng (fz)0.15mm / răng
Độ sâu cắt theo trục (ap)6 mm
Chiều rộng xuyên tâm của vết cắt (ae)0.6 mm
Phương pháp làm mátdầu làm mát
Thời gian gia công4 giờ
Measured Flank Wear0.071 mm

Kết quả kiểm tra: After 4 hours of SUS316 stainless steel milling under the recorded conditions, the measured flank wear width of the DOHRE TEX square end mill was 0.071 mm.

Lưu ý: This result represents one specific machining test and should not be interpreted as a guaranteed tool life or a universal cutting recommendation. Actual tool performance depends on workpiece condition, tool geometry, machine rigidity, cutting engagement, and coolant delivery.

For more information about tool geometry, coatings, and cutting conditions, read our complete guide to selecting end mills for stainless steel.

Sản xuất & Kiểm soát chất lượng

máy CNC của Dohre.jpg


DOHRE CNC đặc biệt chú trọng đến việc chuẩn bị cạnh cắt, độ chính xác kích thước và tiêu chuẩn kiểm tra trong các ứng dụng gia công thép không gỉ. Dao phay ngón dòng TEX được sản xuất dưới sự kiểm soát nghiêm ngặt để đảm bảo hiệu suất cắt ổn định, chất lượng cạnh cắt nhất quán và độ chính xác theo lô đáng tin cậy.


Chúng tôi sử dụng quy trình phun cát lỏng để giảm bavia trên lưỡi cắt và cải thiện chất lượng bề mặt cuối cùng của các chi tiết gia công. Điều này giúp dụng cụ đạt được hiệu suất cắt ổn định hơn trong các ứng dụng gia công bán tinh thép không gỉ.


Các cạnh cắt được xử lý bằng máy thụ động hóa hoàn toàn tự động với chất mài mòn kim cương liên kết cao su. Quá trình này giúp duy trì tính nhất quán của cạnh trên tất cả các dụng cụ, và giá trị thụ động hóa có thể được kiểm soát trong phạm vi ±3 μm.


Việc đo biên dạng được thực hiện bằng thiết bị Walter HELICHECK PLUS của Đức , kết hợp với kiểm tra quang học 150× và kiểm tra ngoại quan độ phân giải cao 300× . Điều này giúp đảm bảo hình dạng dụng cụ ổn định, chất lượng lưỡi cắt đáng tin cậy và sản xuất hàng loạt nhất quán.


Các mũi phay серии TEX được sản xuất trên máy mài chính xác cao 5 trục Walter của Đức. Điều này giúp duy trì độ sắc bén của lưỡi cắt và độ chính xác về kích thước, giúp quá trình cắt diễn ra mượt mà và ổn định hơn khi gia công thép không gỉ.

Câu hỏi thường gặp & Liên hệ với chúng tôi

Câu 1: Dao phay đầu vuông TEX này phù hợp với những loại vật liệu nào?

The DOHRE TEX square end mill is designed primarily for stainless steel machining, including grades 201, 304, and 316. It can also be used for nickel-based alloys under suitable machining conditions. Tool selection should be based on the specific material grade, cutting operation, and tool specifications.

Câu 2: Công cụ này phù hợp với những thao tác gia công nào?

The TEX square end mill is suitable for dynamic milling, slotting, side milling, pocket machining, roughing, and semi-finishing. Its square cutting geometry is particularly useful for machining flat surfaces, straight sidewalls, shoulders, and defined profiles.

Câu 3: Tại sao thiết kế lõi kép lại quan trọng?

The TEX square end mill features dual-core geometry (52%/70%) designed to balance core strength and flute space. This helps support tool rigidity and chip evacuation during demanding stainless steel milling operations. Actual cutting performance depends on tool size, engagement, and machining conditions.

Câu 4: DOHRE có thể cung cấp dao phay đầu vuông theo yêu cầu riêng không?

Yes. DOHRE supports customized carbide square end mills based on customer requirements, including cutting diameter, flute length, overall length, shank dimensions, coating, and cutting geometry. Customers can provide technical drawings or machining requirements for evaluation. Our standard MOQ is 10 pieces, while available stock items may be ordered from 1 piece, subject to stock confirmation.

Câu 5: Có nhiều loại sáo với số lượng ống sáo khác nhau không?

Yes. DOHRE can provide different flute configurations according to the tool specification and machining requirements. The appropriate flute count depends on the workpiece material, cutting operation, chip evacuation requirements, and tool diameter.

Q6: Which DOHRE end mill is suitable for nickel-based alloys such as Inconel?

DOHRE TEX Series carbide end mills can be used for nickel-based alloy machining. The TEX square end mill features Balzers AP AlCrN coating and optimized cutting geometry to support wear resistance and cutting stability. For Inconel and similar nickel-based alloys, the recommended cutter and cutting parameters depend on the specific alloy grade, workpiece condition, and machining operation. Contact DOHRE for application-specific tool recommendations.

Q7: What cutting speed should I use for 316 stainless steel?

In a recorded SUS316 end-face milling test, a DOHRE TEX square end mill (4F-D6×15×D6×50L) was operated at a cutting speed of 94 m/min and a feed per tooth of 0.15 mm. The axial depth of cut was 6 mm, the radial width of cut was 0.6 mm, and oil cooling was used. These values represent specific test conditions rather than universal recommendations. Actual cutting parameters should be adjusted according to the tool size, machining strategy, and machine rigidity.

Q8: Is the TEX square end mill better than budget end mills for stainless steel?

The value of an end mill should be evaluated through tool wear, cutting stability, surface quality, and total machining cost rather than purchase price alone. In a recorded SUS316 milling test, the DOHRE TEX square end mill showed a measured flank wear width of 0.071 mm after 4 hours of machining. This result demonstrates performance under the recorded test conditions but does not establish a universal advantage over all budget end mills. A fair comparison requires the same workpiece material, cutting parameters, and test setup.

Thông tin liên lạc

Bạn có thắc mắc hoặc vấn đề gì mà chúng tôi có thể giúp bạn không?

Hãy cùng thảo luận về dự án của bạn và cách Dohre có thể giúp bạn thiết kế, sản xuất và đưa các công cụ của bạn ra thị trường.

⇧ Tải lên

*Chúng tôi tôn trọng quyền riêng tư của bạn. Khi bạn cung cấp thông tin liên hệ, chúng tôi đồng ý chỉ liên hệ với bạn theo Chính sách bảo mật của chúng tôi.

Sản phẩm tương tự

×

Liên Hệ Với Chúng Tôi

⇧ Tải lên
Captcha

*Chúng tôi tôn trọng quyền riêng tư của bạn. Khi bạn cung cấp thông tin liên hệ, chúng tôi đồng ý chỉ liên hệ với bạn theo Chính sách bảo mật của chúng tôi.

×

Bằng cách tiếp tục sử dụng trang web này, bạn đồng ý với chính sách bảo mật và Điều khoản và Điều kiện của chúng tôi.

Tôi đồng ý