1. For Steel,Stainless steel ;
2. For Semi Finishing Machining, Negative Angle.
1. For Steel,Stainless steel ;
2. For Semi Finishing Machining, Negative Angle.
chipbreaker
DMA special chip breaker designed to keep both sharp cutting edge
and good impact resistance ,which can efficiently avoid accumulate and suitable for semi-finishing ISO M and ISO P material.
| Type of processing | P | M | K | N | S |
| Finishing | DPF/DTF | DMF | AK | ||
| Semi finishing | DPM/DPMK/TM | DMM/DMA | DZT/GHB | ALH | |
| Roughing | DPR/DTR | DTR | Flat |
Grade Information
1.General chip breaker,suitable for ISO M materials
2. CVD coating : High Co content and fine WC grain substrate ,gives wonderful cutting edge strength,combines with good thermal stability silicon coating ,it has very small coefficient of friction ,and good nano hardness
P Steel | M Stainless steel | K Cast Iron | N aluminum | |||||||
| CVD | PVD | CVD | Non-Coating | |||||||
| P10 | P20 | P30 | P40 | M10 | M20 | M30 | K10 | K20 | K30 | N20 |
| DH1210 | DH1220D | DH1220 | DH1230 | DP3210 | DP3220 | DP3120 | DO2110 | DO2220 | DO2120 | AK10 |
| DH4100 | DH4200 | DH4130 | ||||||||
| CNGM1204-DMA |
| DNGM1504-DMA |
| DNGM1506-DMA |
| SNMG1204-DMA |
| SNMG1506-DMA |
| TNMG1604-DMA |
| TNMG2204-DMA |
| VNMG1604-DMA |
| WNMG0804-DMA |