2020-11-17 Sudden changes in cutter engagement during entry, exit, cornering or interrupted cutting, excessive depth of cut, unstable feed, long tool overhang, or poor chip evacuation.
https://www.dohrecnc.com/product-support/sudden-cutting-load-changes.html2020-11-16 Excessive tool deflection, runout, long tool overhang, uneven finishing allowance, worn cutting edges, insufficient setup rigidity, or incorrect tool compensation.
https://www.dohrecnc.com/product-support/poor-dimensional-accuracy-end-milling.html2020-11-17 Excessive cutting load, long tool overhang, poor setup rigidity, excessive runout, unstable cutter engagement, or continued machining with a worn cutting edge.
https://www.dohrecnc.com/product-support/severe-cutting-edge-damage.html2020-11-17 Excessive tool overhang, worn or contaminated collets, poor tool clamping, insufficient workpiece rigidity, spindle runout, or vibration from the machine and fixture system.
https://www.dohrecnc.com/product-support/end-mill-toolholding-instability.html2026-09-02 Insufficient chip removal, excessive cutter engagement, chip accumulation in slots or pockets, poor coolant or air direction, unsuitable cutting conditions, or repeated recutting of loose chips.
https://www.dohrecnc.com/product-support/end-mill-chip-evacuation.html2026-09-02 Excessive cutting speed, tool runout, uneven flute loading, unstable cutter engagement, chip recutting, poor toolholding, or continued machining after early edge wear develops.
https://www.dohrecnc.com/product-support/premature-uneven-end-mill-wear.html2026-09-02 Poor chip evacuation, excessive feed or cutting load, drill runout, long tool overhang, insufficient coolant, unstable entry, or chips becoming packed inside the hole.
https://www.dohrecnc.com/product-support/carbide-drill-breakage.html2026-09-02 Excessive or uneven cutting load, drill runout, unstable entry, interrupted cutting, poor workpiece rigidity, excessive feed, or continued drilling with an already damaged cutting edge.
https://www.dohrecnc.com/product-support/carbide-drill-cutting-edge-chipping.html2026-09-02 Excessive drill runout, unstable entry, tool deflection, long drill overhang, worn cutting edges, poor workpiece clamping, or insufficient machine and toolholding rigidity.
https://www.dohrecnc.com/product-support/carbide-drill-hole-accuracy.html2026-09-02 Worn or chipped cutting edges, excessive runout, unstable feed, poor chip evacuation, insufficient workpiece support, vibration, or excessive cutting load during hole breakthrough.
https://www.dohrecnc.com/product-support/drilled-hole-surface-finish-burrs.html2026-09-02 Increasing hole depth, insufficient coolant delivery, poor chip formation, excessive chip volume, unsuitable feed, chips packing inside the flutes, or an ineffective drilling and retraction cycle.
https://www.dohrecnc.com/product-support/carbide-drill-chip-evacuation.html2026-09-02 Excessive cutting speed, drill runout, uneven edge loading, poor coolant delivery, chip recutting, unstable cutting conditions, or continued drilling after early cutting edge wear develops.
https://www.dohrecnc.com/product-support/premature-or-uneven-wear.htmlBy continuing to use the site you agree to our privacy policy Terms and Conditions.