1. For Cast Iron
2. For Semi Finishing Machining
1. For Cast Iron
2. For Semi Finishing Machining
chipbreaker
DGH special chip breaker designed to keep both sharp cutting edge, and good impact resistance ,which can efficiently avoid accumulate and suitable for semi-finishing ISO M and ISO P material,suitable for cast iron semi-finishing and light interrupted machinning.
Type of processing | P | M | K | N | S |
Finishing | DPF/DTF | DMF | AK | ||
Semi finishing | DPM/DPMK/TM | DMM/DMA | DZT/GHB | ALH | |
Roughing | DPR/DTR | DTR | Flat |
Grade Information
CVD coating : Mild-coarse grain substrate combines with hard-wearing and ultrathick alumina CVD coating ,treated by special after coating treatment ,which as good roughness and wear resistnce .
P Steel | M Stainless steel | K Cast Iron | N aluminum | |||||||
CVD | PVD | CVD | Non-Coating | |||||||
P10 | P20 | P30 | P40 | M10 | M20 | M30 | K10 | K20 | K30 | N20 |
DH1210 | DH1220D | DH1220 | DH1230 | DP3210 | DP3220 | DP3120 | DO2110 | DO2220 | DO2120 | AK10 |
DH4100 | DH4200 | DH4130 |
CNGM1204-DGH |
DNGM1504-DGH |
DNGM1506-DGH |
SNMG1204-DGH |
SNMG1506-DGH |
TNMG1604-DGH |
TNMG2204-DGH |
VNMG1604-DGH |
WNMG0804-DGH |