TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter
TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter
TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter
TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter
TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter
TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter
TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter

TEX Deep Groove Carbide 4 Flutes Flat Milling Cutter

stainless steel,under hrc55.
For semi-finishing&roughing(±5 μm).

workpiece material

  • stainless steel
  • high temperature titanium alloy

application type

  • Semi-Finishing
  • medium
  • Roughing

flute type

  • Square

Coating

  • ALCRN

Product Description

Square end mill:Rough milling, removal of a large number of blank, small area horizontal plane or contour finishing milling


TEX平刀


specificationFlute diaFlute lengthShank diameterOverall L
D1.0X3XD4X501.0 3450
D1.0X3X6X501.0 3650
D1.0X4XD4X501.0 4450
D1.0X6XD6X501.0 6650
D1.5X4XD6X501.5 4650
D1.5X4.5XD4X501.5 4.5450
D2.0X6XD4X502.0 6450
D2.0X6XD6X502.0 6650
D2.5X7XD4X502.5 7450
D2.5X7XD6X502.5 7650
D3.0X8XD3X503.0 8350
D3.0X8XD4X503.0 8450
D3.0X8X6X503.0 8650
D3.5X10XD4X503.5 10450
D3.5X11XD6X503.5 11650
D4.0X11XD4X504.0 11450
D4.0X11XD6X504.0 11650
D4.5X13XD6X504.5 13650
D5.0X13XD5X505.0 13.0 5.0 50
D5.0X13XD6X505.0 13.0 6.0 50
D5.5X13XD6X505.5 13.0 6.0 50
D6.0X15XD6X506.0 15.0 6.0 50
D6.5X10XD8X606.5 10.0 8.0 60
D6.5X17XD8X606.5 17.0 8.0 60
D7.0X17XD8X607.0 17.0 8.0 60
D7.5X17XD8X607.517860
D8.0X20XD8X60820860
D8.5X23XD10X758.5231075
D9.0X23XD9X75923975
D9.0X23XD10X759231075
D9.5X25XD10X759.5251075
D10.0X25XD10X7510251075
D10.5X25XD12X7510.5251275
D11.0X28XD12X7511281275
D11.5X28XD12X7511.5281275
D12.0X30XD12X7512301275
D13.0X45XD14X100134514100
D14.0X45XD14X100144514100
D15.0X45XD16X100154516100
D16.0X45XD16X100164516100
D17.0X45XD18X100174518100
D18.0X45XD18X100184518100
D20.0X45XD20X100204520100
D22.0X45XD22X100224522100
D25.0X45XD25X100254525100


Detailed Images


1.Feature:

a.Specified in stainless steel,under hrc55

b.Increased productivity with high feed rates and large depths cut Feed rates up to 2,500mm/min Strong end tooth design ideal for plunge and pocket milling ideal using on Stainless steel & Tool steel.

c.Unique design of angle to make it more wear-resisting & sharp,cutting process is more easy and quick ,makea life longer


2.Design:

 

IMG_7988 拷贝

1.Double core diameter design ideal.:strong strength for plunge and pocket milling ideal using on stainless steel

a.The small core diameter of the front end can ensure the chip removal smooth ,take away the heat of cutting production, and prevent the production of built-up edge

b.The big core diameter at the back end ehance the rigidity of cutting tools and improve the surface quality of products


image.png

1

2.a≠b Unequal design:prevents vibration and reduces cutting force at slotting. This has led to the high speed and high feed machining

IMG_7987 拷贝

3.Variable helix to prevent vibration

Special variable pitch profile reduces cutting force and stress on machine spindle



Advantages

1.passivation technology before coating ,Fine Edge Treatment,its not easy to produce the built-up edge


未标题-1
Before passivation treament(133 times)
2
3after passivtion treament with brush(133 times)
45After  brush passivation treament + sandblasting polishing (133 times)

2.Four times of cutting tool detection to ensure the quality


1) The first piece, the tail piece and the sampling inspection in the production process with Helicheck PlusWalter equipment to full inspection the Circumferential Rake, circumferential edge back Angle, end tooth front Angle, end tooth back Angle, R Angle value and profile, the profile of the forming knife
(2) after production , full inspection by two dimensions measuring instrument or Microscopic,flute number,outer diameter,flute length ,core diameter,helical angle,width of relief angle,End Tooth Eccentricity and end tooth throught a center,Disc angle of end tooth,Outside run-out and Whether there are notches, jagged
(3) before coating Spot check by two dimensions measuring instrument
(4)After coating full inspection by two dimensions measuring instrument 


3.excellent R&D teams and professional technology support teams

Packing&Shipping

IMG_6245 拷贝
1.piece in a plastic pipe ,10pieces per group and air bubble paper in a carton to reduce the shock.
未标题-12.Other package requests designed by customer will be accepted.


FAQ & Contact Us

Q: Are you trading company or manufacturer ?
A: Yes ,We are factory for more than 10 years in CNC tools.
Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
Q: Do you provide samples ? is it free or extra ?A: No, we don't provide samples, we we can offer you some discounts depends on your order quantity.
Q: What is your terms of payment ?A: T/T 30% deposit,70% balance against B/L copy or 100% irrevocable LC at sight. More payment terms available(Paypal, Western Union)
Q: Do you make OEM ?
A: Yes, we do. OEM is accepted with your brand lase in the products by our laser machine and label of the OEM brand would be stuck on the box before goods shipped out.
Q: What the machine do you adopt to produce the products ?A: We use the walter which imported from Germany.


Related Products

×

Contact Us

captcha